Product description
Nikon NIKKOR Z 24–200mm f/4–6.3 VR
The NIKKOR Z 24–200mm f/4–6.3 VR is a compact all-in-one zoom lens for Nikon Z mirrorless cameras with a full-frame sensor. Its 8.3x zoom range extends from a pronounced wide angle to the telephoto range. This makes it suitable for travel, landscape, architecture, street, portrait and distant subjects without having to change lenses frequently on the go.
Large zoom range at low weight
Despite its focal length range of 24 to 200 mm, the lens weighs only about 570 g. A zoom lock secures the barrel in the compact transport position. Depending on the camera used, the freely assignable control ring can control focus, aperture, ISO sensitivity or exposure compensation, among other things.
Steady photos and videos
The built-in image stabiliser compensates for camera shake with an effect of up to 5.0 stops at the telephoto end, measured according to CIPA. The stepping motor focuses quickly and quietly. Reduced focus breathing and the smooth operation of the zoom and control rings support steady video footage.
Sophisticated optical design
The optical formula comprises 19 elements in 15 groups. These include two ED glass elements, one aspherical ED glass element and two aspherical elements. The ARNEO coating reduces ghosting and flare. A fluorine coating on the front element makes it easier to remove dust and dirt.
Close-ups and robust design
The minimum focusing distance is 0.5 m at 24 mm and 0.7 m at 200 mm. A maximum magnification of 0.28× is achieved at the telephoto end. Seals help protect against dust and dripping water; the lens is not completely waterproof.
Technical data
| Product type |
Travel zoom lens for Nikon Z |
| Sensor format |
FX / full frame, can also be used on DX cameras |
| Focal length |
24–200 mm |
| Maximum aperture |
f/4–6,3 |
| Minimum aperture |
f/22–36 |
| Optical construction |
19 elements in 15 groups |
| Special glass |
2 ED elements, 1 aspherical ED element, 2 aspherical elements |
| Image stabilisation |
Optical VR, up to 5.0 stops |
| Minimum focusing distance |
0.5 m at 24 mm; 0.7 m at 200 mm |
| Maximum reproduction ratio |
0,28× |
| Aperture blades |
7, rounded |
| Filter thread |
67 mm |
| Dimensions |
approx. 76.5 mm diameter × 114 mm length |
| Weight |
approx. 570 g |
| Supplied accessories |
Front cap LC-67B, rear cap LF-N1, lens hood HB-93, lens case CL-C1 |
Notes on safe use
Do not look directly at the sun or other intense light sources through the lens. Hold the lens securely when attaching and removing it, switch off the camera and keep the mount contacts clean. Attach both caps when not in use. Protect from strong impacts, extreme heat and prolonged moisture.
Manufacturer and responsible economic operator in the EU
Nikon Europe B.V., Stroombaan 14, 1181 VX Amstelveen, the Netherlands.
